Ultrasonication followed by aqueous two-phase system for extraction, on-site modification and isolation of microalgal starch with reduced digestibility.

Microalgae are new and sustainable sources of starch with higher productivity and flexible production modes than conventional terrestrial crops, but the downstream processes need further development. Here, ultrasonication (with power of 200 W or 300 W and duration of 10, 15, 20, or 25 min) was applied to simultaneously extract and modify starch from a marine microalga Tetraselmis subcordiformis for reducing the digestibility, and an aqueous two-phase system (ATPS) of ethanol/NaH2PO4 was then used to isolate the starches with varied properties. Increasing ultrasonic duration facilitated the partition of starch into the bottom pellet, while enhancing the ultrasonic power was conducive to the allocation in the interphase of the ATPS. The overall starch recovery yield reached 73 âˆ¼ 87 % and showed no significant difference among the ultrasonic conditions tested. The sequential ultrasonication-ATPS process successfully enriched the starch with purities up to 65 % âˆ¼ 88 %, which was among the top levels reported in microalgal starch isolated. Ultrasonication produced more amylose which was mainly fractionated into the interface of the ATPS. The digestibility of the starch was altered under different ultrasonic conditions and varied from different ATPS phases as well, with the one under the ultrasonic power of 200 W for 15 min at the bottom pellet having the highest resistant starch content (RS, 39.7 %). The structural and compositional analysis evidenced that the ultrasonication-ATPS process could exert impacts on the digestibility through altering the surface roughness and fissures of the starch granules, modulating the impurity compositions (protein and lipid) that could interact with starch, and modifying the long- and short-range ordered structures. The developed ultrasonication-ATPS process provided novel insights into the mechanism and strategy for efficient production of functional starch from microalgae with a potential in industrial application.

Evaluation of the preoperative neutrophil-to-lymphocyte ratio as a predictor of the micropapillary component of stage IA lung adenocarcinoma.

OBJECTIVE: To assess the ability of markers of inflammation to identify the solid or micropapillary components of stage IA lung adenocarcinoma and their effects on prognosis. METHODS: We performed a retrospective study of clinicopathologic data from 654 patients with stage IA lung adenocarcinoma collected between 2013 and 2019. Logistic regression analysis was used to identify independent predictors of these components, and we also evaluated the relationship between markers of inflammation and recurrence. RESULTS: Micropapillary-positive participants had high preoperative neutrophil-to-lymphocyte ratios. There were no significant differences in the levels of markers of systemic inflammation between the participants with or without a solid component. Multivariate analysis showed that preoperative neutrophil-to-lymphocyte ratio (odds ratio [OR] = 2.094; 95% confidence interval [CI], 1.668-2.628), tumor size (OR = 1.386; 95% CI, 1.044-1.842), and carcinoembryonic antigen concentration (OR = 1.067; 95% CI, 1.017-1.119) were independent predictors of a micropapillary component. There were no significant correlations between markers of systemic inflammation and the recurrence of stage IA lung adenocarcinoma. CONCLUSIONS: Preoperative neutrophil-to-lymphocyte ratio independently predicts a micropapillary component of stage IA lung adenocarcinoma. Therefore, the potential use of preoperative neutrophil-to-lymphocyte ratio in the optimization of surgical strategies for the treatment of stage IA lung adenocarcinoma should be further studied.

New structure transistors for advanced technology node CMOS ICs.

Over recent decades, advancements in complementary metal-oxide-semiconductor integrated circuits (ICs) have mainly relied on structural innovations in transistors. From planar transistors to the fin field-effect transistor (FinFET) and gate-all-around FET (GAAFET), more gate electrodes have been added to three-dimensional (3D) channels with enhanced control and carrier conductance to provide higher electrostatic integrity and higher operating currents within the same device footprint. Beyond the 1-nm node, Moore's law scaling is no longer expected to be applicable to geometrical shrinkage. Vertical transistor stacking, e.g. in complementary FETs (CFET), 3D stack (3DS) FETs and vertical-channel transistors (VFET), for enhanced density and variable circuit or system design represents a revolutionary scaling approach for sustained IC development. Herein, innovative works on specific structures, key process breakthroughs, shrinking cell sizes and design methodologies for transistor structure research and development are reviewed. Perspectives on future innovations in advanced transistors with new channel materials and operating theories are also discussed.

Using the inherent elements in yeast biomass to produce Ni2P/N-doped biocarbon composites for efficient hexavalent chromium reduction.

The heterogeneous catalytic reduction of Cr(VI) to Cr(III) is an effective strategy for aqueous Cr(VI) contamination abatement, which requires the development of highly efficient, low-cost, and recyclable catalysts. Herein, Ni2P/N-doped biocarbon composites (Ni2P/N-BC) were fabricated through an anoxic pyrolysis process using NaCl and KCl as activators. A precursor of yeast biomass provided the essential C, N, and P elements for Ni2P/N-BC formation. When adopted for Cr(VI) reduction in the presence of oxalic acid as a reductant, the fabricated Ni2P/N-BC performed superior catalytic activity with a 100% Cr(VI) reduction efficiency within 10 min (Ni2P/N-BC-5 = 0.2 g L-1, oxalic acid = 0.4 g L-1, Cr(VI) = 20 mg L-1). Typical affecting parameters, e.g., catalyst dosage, oxalic acid loading, reaction temperature, initial solution pH, and water matrix, were investigated. Ni2P/N-BC exhibited good applicability in a broad pH range from 3.0 to 9.0 and in actual aquatic systems. Cr(VI) reduction efficiency remained 92.7% after five recycle runs. Such promising catalytic activity may originate from the well-crystallized Ni2P, N-doped biocarbon framework and high specific surface area of the materials. Preliminary reaction mechanism analysis indicated that the favorable charge state of Ni2P, fast hydrogen transfer, affinity of oxalic acid to Cr(VI), and inherent electron transfer in the biocarbon matrix contributed to effective Cr(VI) reduction. This work not only provides a facile and low-cost strategy to construct Ni2P/N-doped biocarbon nanosheet composite using environmentally benign biomass but also brings new insights for the remediation of Cr(VI) contamination.

[Cangxi Tongbi Capsules promote chondrocyte autophagy by regulating circRNA＿0008365/miR-1271/p38 MAPK pathway to inhibit development of knee osteoarthritis].

To investigate the mechanism by which Cangxi Tongbi Capsules promote chondrocyte autophagy to inhibit knee osteoarthritis(KOA) progression by regulating the circRNA＿0008365/miR-1271/p38 mitogen-activated protein kinase(MAPK) pathway. The cell and animal models of KOA were established and intervened with Cangxi Tongbi Capsules, si-circRNA＿0008365, si-NC, and Cangxi Tongbi Capsules combined with si-circRNA＿0008365. Flow cytometry and transmission electron microscopy were employed to determine the level of apoptosis and observe autophagosomes, respectively. Western blot was employed to reveal the changes in the protein levels of microtubule-associated protein light chain 3(LC3)Ⅱ/Ⅰ, Beclin-1, selective autophagy junction protein p62/sequestosome 1, collagen Ⅱ, a disintegrin and metalloproteinase with thrombospondin motifs 5(ADAMTS-5), and p38 MAPK. The mRNA levels of circRNA＿0008365, miR-1271, collagen Ⅱ, and ADAMTS-5 were determined by qRT-PCR. Hematoxylin-eosin staining was employed to reveal the pathological changes of the cartilage tissue of the knee, and enzyme-linked immunosorbent assay to measure the levels of interleukin-1ß(IL-1ß) and tumor necrosis factor-alpha(TNF-α). The chondrocytes treated with IL-1ß showed down-regulated expression of circRNA＿0008365, up-regulated expression of miR-1271 and p38 MAPK, lowered autophagy level, increased apoptosis rate, and accelerated catabolism of extracellular matrix. The intervention with Cangxi Tongbi Capsules up-regulated the expression of circRNA＿0008365, down-regulated the expression of miR-1271 and p38 MAPK, increased the autophagy level, decreased the apoptosis rate, and weakened the catabolism of extracellular matrix. However, the effect of Cangxi Tongbi Capsules was suppressed after interfering with circRNA＿0008365. The in vivo experiments showed that Cangxi Tongbi Capsules dose-dependently inhibited the p38 MAPK pathway, enhanced chondrocyte autophagy, and mitigated articular cartilage damage and inflammatory response, thereby inhibiting the progression of KOA in rats. This study indicated that Cangxi Tongbi Capsules promoted chondrocyte autophagy by regulating the circRNA＿0008365/miR-1271/p38 MAPK pathway to inhibit the development of KOA.

Demonstration of Germanium Vertical Gate-All-Around Field-Effect Transistors Featured by Self-Aligned High-κ Metal Gates with Record High Performance.

A special Ge nanowire/nanosheet (NW/NS) p-type vertical sandwich gate-all-around (GAA) field-effect transistor (FET) (Ge NW/NS pVSAFET) with self-aligned high-κ metal gates (HKMGs) is proposed. The Ge pVSAFETs were fabricated by high-quality GeSi/Ge epitaxy, an exclusively developed self-limiting isotropic quasi atomic layer etching (qALE) of Ge selective to both GeSi and the (111) plane, top-drain implantation, and ozone postoxidation (OPO) channel passivation. The Ge pVSAFETs, which have hourglass-shaped (111) channels with the smallest size range from 5 to 20 nm formed by qALE, have reached a record high Ion of ∼291 µA/µm and exhibited good short channel effects (SCEs) control. The integration flow is compatible with mainstream CMOS processes, and Ge pVSAFETs with precise control of gate lengths/channel sizes were obtained.

Investigation on Recrystallization Channel for Vertical C-Shaped-Channel Nanosheet FETs by Laser Annealing.

Transistor scaling has become increasingly difficult in the dynamic random access memory (DRAM). However, vertical devices will be good candidates for 4F2 DRAM cell transistors (F = pitch/2). Most vertical devices are facing some technical challenges. For example, the gate length cannot be precisely controlled, and the gate and the source/drain of the device cannot be aligned. Recrystallization-based vertical C-shaped-channel nanosheet field-effect transistors (RC-VCNFETs) were fabricated. The critical process modules of the RC-VCNFETs were developed as well. The RC-VCNFET with a self-aligned gate structure has excellent device performance, and its subthreshold swing (SS) is 62.91 mV/dec. Drain-induced barrier lowering (DIBL) is 6.16 mV/V.

High-Quality Recrystallization of Amorphous Silicon on Si (100) Induced via Laser Annealing at the Nanoscale.

At sub-3 nm nodes, the scaling of lateral devices represented by a fin field-effect transistor (FinFET) and gate-all-around field effect transistors (GAAFET) faces increasing technical challenges. At the same time, the development of vertical devices in the three-dimensional direction has excellent potential for scaling. However, existing vertical devices face two technical challenges: "self-alignment of gate and channel" and "precise gate length control". A recrystallization-based vertical C-shaped-channel nanosheet field effect transistor (RC-VCNFET) was proposed, and related process modules were developed. The vertical nanosheet with an "exposed top" structure was successfully fabricated. Moreover, through physical characterization methods such as scanning electron microscopy (SEM), atomic force microscopy (AFM), conductive atomic force microscopy (C-AFM) and transmission electron microscopy (TEM), the influencing factors of the crystal structure of the vertical nanosheet were analyzed. This lays the foundation for fabricating high-performance and low-cost RC-VCNFETs devices in the future.

[Growth Regularity of Pulmonary Ground Glass Nodules Based on 3D Reconstruction Technology].

BACKGROUND: Since the popularization of computed tomography (CT) technology, the detection rate of pulmonary ground glass nodules (GGNs) with imaging follow-up as the main management method has increased significantly. The purpose of this study is to quantitatively analyze the changes of pulmonary GGNs during the follow-up process with three-dimensional reconstruction technology, explore the natural progression of pulmonary GGNs, and provide effective basis for clinical guidance for patients to conduct reasonable management of nodules. METHODS: A total of 115 cases of pulmonary GGNs with regular follow-up in the Combined Outpatient Department of Zhoushan Hospital from March 2015 to November 2022 were enrolled. Quantitative imaging features of nodules were extracted by semi-automatic segmentation of 3D Slicer software to evaluate the growth of nodules and clinical intervention during follow-up. RESULTS: The average baseline age of the patients was (56.9±10.1) yr. The mean follow-up time was (48.8±18.9) months. The two-dimensional diameter of baseline CT scan was (7.9±2.9) mm, and the maximum three-dimensional diameter was (10.1±3.4) mm. The two-dimensional diameter of the last CT scan was (9.9±4.7) mm, and the maximum three-dimensional diameter was (11.4±5.1) mm. A total of 27 cases (23.5%) showed an increase during follow-up, with a median volume doubling time of 822 days and a median mass doubling time of 1,007 days. 32 cases were surgically resected, including 6 cases of invasive adenocarcinoma (IAC), 16 cases of minimally invasive adenocarcinoma (MIA), 8 cases of adenocarcinoma in situ (AIS) and 2 cases of atypical adenomatous hyperplasia (AAH). Five nodules underwent surgical intervention due to the progression of two-dimensional diameter, which was pathologically confirmed as pre-invasive lesions, but their three-dimensional maximum diameter showed no significant change. Nodular morphology, lobulated sign, spiculated sign and vacuole signs all promoted the growth of nodules in univariate analysis. There were significant differences in age, baseline diameter, mean CT value, median CT value, 10% and 90% percentile CT number between the growth group and the stable group (P<0.05). Multivariate Logistic regression analysis showed that age and average CT value were risk factors for nodule growth (P<0.05). Receiver-operating characteristic (ROC) curve analysis results indicated that the age ≥63 years old, the baseline three-dimensional maximum diameter ≥9.2 mm, and the average CT value ≥-507.8 HU were more likely to accelerate the growth of GGNs. The maximum three-dimensional diameter ≥14.4 mm and the average CT value ≥-495.7 HU may be a higher malignant probability. CONCLUSIONS: GGNs show an inert growth process, and the use of three-dimensional measurements during follow-up is of greater significance. For persistent glass grinding nodules ≥63 years old, the baseline three-dimensional maximum diameter ≥9.2 mm, and the average CT value ≥-507.8 HU are more likely to increase. However, most nodules still have good prognosis after progression, and long-term follow-up is safe.

Regulation of the autochthonous microbial community in excess sludge for the bioconversion of carbon dioxide to acetate without exogenic hydrogen.

The autochthonous microbial community from excess sludge was regulated for enhanced conversion of CO2 to acetate without exogenic H2. It was interesting that the acetate-fed system exhibited a surprising performance to regulate the microbial community for a high acetate yield and selectivity. As a result, some hydrogen-producing bacteria (e.g., Proteiniborus) and acetogenic bacteria with the ability of CO2 reduction were enriched by acetate feeding, 2-bromoethanesulfonate (BES) addition and CO2 stress. When the selected microbial community was applied to convert CO2, the accumulation of acetate was positively correlated to the concentration of yeast extract. Finally, the acetate yield reached up to 67.24 mM with a high product selectivity of 84 % in the presence of yeast extract (2 g/L) and sufficient CO2 in semi-continuous culture for 10 days. This work should help get new insights into the regulation of microbial community for the efficient acetate production from CO2.

Treatment of bisphenol pollutant in water by N,P-co-doped carbon nanosheet: Fast degradation, toxicity elimination and reaction mechanism investigation.

Metal-free carbon catalysts perform well in peroxymonosulfate-based advanced oxidation process for the treatment of organic pollutant-containing wastewater. Herein, a natural biomolecule of adenosine triphosphate (ATP), containing abundant N and P elements, served as sole precursor to prepare N,P-co-doped carbon through one-step anoxic pyrolysis, which was applied as peroxymonosulfate activator to treat bisphenol-contaminated water. Owing to the endogenous N and P elements in ATP, in-situ doping was achieved for the prepared carbon material with excellent doping effect, such as high doping amount and numerous defects. During pyrolysis process, the generated gases facilitated the exfoliation of carbon structure, resulting in a nanosheet-like morphology with large specific surface area, e.g., 852.75 m2 g-1 for NPCN-900 sample obtained at 900 °C. Benefiting from the structural modulation brought by N,P co-doping, typical sample of NPCN-900 presented excellent catalytic performance towards bisphenol AF (BPAF) degradation through PMS activation. An apparent reaction rate constant of 0.4115 min-1 was calculated under the investigated reaction conditions. Further studies indicated that 1O2, surface-bound •OH and SO4-• worked together in NPCN-900/PMS system for BPAF degradation. Graphitic N, pyrrolic N, CO groups, defect structure and the doped P atoms in NPCN-900 contributed to PMS activation. It was also important that the toxicity of BPAF solution could be preliminarily eliminated after treatment by NPCN-900/PMS system, which was verified by ecotoxicity assessments through ECOSAR program and green algae growth experiments.

LC-MS/MS Based Volatile Organic Compound Biomarkers Analysis for Early Detection of Lung Cancer.

(1) Background: lung cancer is the world's deadliest cancer, but early diagnosis helps to improve the cure rate and thus reduce the mortality rate. Annual low-dose computed tomography (LD-CT) screening is an efficient lung cancer-screening program for a high-risk population. However, LD-CT has often been characterized by a higher degree of false-positive results. To meet these challenges, a volatolomic approach, in particular, the breath volatile organic compounds (VOCs) fingerprint analysis, has recently received increased attention for its application in early lung cancer screening thanks to its convenience, non-invasiveness, and being well tolerated by patients. (2) Methods: a LC-MS/MS-based volatolomics analysis was carried out according to P/N 5046800 standard based breath analysis of VOC as novel cancer biomarkers for distinguishing early-stage lung cancer from the healthy control group. The discriminatory accuracy of identified VOCs was assessed using subject work characterization and a random forest risk prediction model. (3) Results: the proposed technique has good performance compared with existing approaches, the differences between the exhaled VOCs of the early lung cancer patients before operation, three to seven days after the operation, as well as four to six weeks after operation under fasting and 1 h after the meal were compared with the healthy controls. The results showed that only 1 h after a meal, the concentration of seven VOCs, including 3-hydroxy-2-butanone (TG-4), glycolaldehyde (TG-7), 2-pentanone (TG-8), acrolein (TG-11), nonaldehyde (TG-19), decanal (TG-20), and crotonaldehyde (TG-22), differ significantly between lung cancer patients and control, with the invasive adenocarcinoma of the lung (IAC) having the most significant difference. (4) Conclusions: this novel, non-invasive approach can improve the detection rate of early lung cancer, and LC-MS/MS-based breath analysis could be a promising method for clinical application.

Microstructural tailoring of porous few-layer graphene-like biochar from kitchen waste hydrolysis residue in molten carbonate medium: Structural evolution and conductive additive-free supercapacitor application.

Biomass-derived graphene-like material is a promising candidate for supercapacitor electrodes, while it is critical to controllably convert biomass into structure-tunable graphene. Herein, few-layer graphene-like biochar (FLGBS) was successfully fabricated from waste biomass in molten carbonate medium. Molten carbonate acted as the effective catalyst for graphitizing and the liquid medium for microcrystal relinking to achieve the rearrangement of carbon structure. It was found that the stacking of graphene layer and formation of porous structure were influenced by the volume of reaction medium and biomass pre­carbonation. Namely, increasing the dosage of molten K2CO3 was in favor to form few layer-type graphene structure, but excess dosage could destroy the nanopore structure to expand the aperture. In addition, pre­carbonation at high temperature impeded the exfoliation of graphene layers. When FLGBSs were applied to fabricate conductive additive-free electrode, they displayed a superior supercapacitor performance (up to 237.4 F g-1 at 0.5 Ag-1). This excellent performance should be attributed to the large specific surface area, hierarchical pore structure and graphene-like structure. In short, this work could help to get insights into the structural evolution of biomass carbon to graphene-like biochar in molten carbonate medium and achieve the tailoring of microstructure for further application in energy storage.

Degradation and phosphorus immobilization treatment of organophosphate esters hazardous waste by Fe-Mn bimetallic oxide.

Organophosphate esters (OPEs) waste is difficult to dispose effectively because of its stability and the potential risk of P element. In this study, taking one typical organic extractant of tributyl phosphate (TBP) as an example, we proposed a strategy to treat OPEs inspired by chemical looping combustion (CLC) technology-oxygen carrier immobilization process (OCIP), aiming at efficient TBP degradation and simultaneous P immobilization. Adopting Fe-Mn bimetallic oxide (FMBO) as oxygen carrier, an almost 100% P immobilization efficiency was achieved under recommended conditions which were obtained by response surface methodology. Meanwhile, gaseous products released from TBP degradation, e.g., non-methane hydrocarbon, was lower than the maximum allowable emission concentration limit. Further characterizations implied that P-species released from reaction process were mainly immobilized as stable inorganic forms of metaphosphate, phosphate and pyrophosphate. On the basis of identifying degradation intermediates, we proposed a possible degradation pathways. FMBO as an oxygen carrier provided sufficient oxygen molecules for flameless combustion of OCIP process. Electron paramagnetic resonance measurement confirmed the existence of oxygen vacancies on FMBO surface, which contributed to the formation of •O2-. Oxidation by oxygen molecules and •O2- attack resulted in the degradation and mineralization of TBP, with simultaneously achieving P stabilization.

Achyranthoside D attenuates chondrocyte loss and inflammation in osteoarthritis via targeted regulation of Wnt3a.

BACKGROUND: Achyranthes bidentata Blume (A. bidentata) is a common Chinese herb used to treat osteoarthritis (OA). Achyranthoside D (Ach-D) is a glucuronide saponin isolated from A. bidentata. PURPOSE: To assess the mechanisms of action of Ach-D and its effects on OA. METHODS: The effects of Ach-D were evaluated in rats underwent anterior cruciate ligament transection (ACLT) with medial meniscectomy (MMx) and in interleukin (IL)-1ß-induced chondrocytes. Histological changes in rat cartilage tissues were detected using Safranin O-Fast green and haematoxylin-eosin staining. Immunohistochemical staining, qRT-PCR, ELISA, immunoblotting, and immunofluorescence were conducted to examine cartilage degeneration-related and inflammation-related factor expression. CCK-8, LDH assay, and EdU staining were performed to detect chondrocyte death. RESULTS: Ach-D dose-dependently reduced the Osteoarthritis Research Society International (OARSI) scores, alleviated cartilage injury, and decreased the serum concentrations of CTX-II and COMP in ACLT-MMx models. Ach-D increased the expression levels of collagen II and aggrecan and decreased the levels of cartilage degeneration-related proteins, ADAMTS-5, MMP13, and MMP3, in rat cartilage tissues. Additionally, nod-like receptor protein 3 (NLRP3)-related inflammation was reduced by Ach-D, as shown by the significantly inhibited expression levels of NLRP3, ASC, GSDMD, IL-6, TNF-α, IL-1ß, and IL-18 in rat cartilage tissues. In primary rat chondrocytes, Ach-D protected against IL-1ß-induced viability loss and LDH release. Wnt3a is the target protein of Ach-D. Mechanistically, Ach-D alleviated OA by inhibiting Wnt signalling. CONCLUSION: ACH-D may reduce inflammation and cartilage degeneration by inhibiting the Wnt signalling pathway, thereby reducing OA.

An FeP/carbon composite derived from a phytic acid-Fe3+ complex for sulfathiazole degradation through peroxymonosulfate activation.

Peroxymonosulfate (PMS) activation-based advanced oxidation technology possesses great potential for antibiotic-containing wastewater treatment. Herein, we developed an iron phosphide/carbon composite and verified its capability and superiority towards a model antibiotic pollutant (sulfathiazole, STZ) degradation through PMS activation. Benefiting from the chelating ability of phytic acid (PA) with metal ions and its abundance on phosphorous element, a PA-Fe3+ complex was firstly formed and then served as sole precursor for iron phosphide formation by anoxic pyrolysis. Well crystalized FeP particle were found loading on the simultaneously formed thin layer carbon structure. Catalytic activity evaluation showed that FeP/carbon composite could remove over 99% of STZ (20 mg L-1) in 20 min adsorption and 30 min catalysis process under the reaction conditions of catalyst dosage 0.2 g L-1, PMS loading 0.15 g L-1. A pseudo-first-order reaction rate constant of 0.2193 min-1 was obtained, which was among the highest compared with reported studies. Further investigations indicated that the developed FeP/carbon composite worked well in a wide solution pH range of 3-9. Reaction mechanism study showed that reactive species of SO4-• and 1O2 generated from PMS activation played major roles for STZ degradation. Based on liquid chromatography-mass spectroscopy (LC-MS) analysis, a few STZ degradation intermediate products were identified, which facilitated the proposal of STZ degradation pathways. The possible ecological risk of STZ and related degradation intermediates were also considered by toxicity assessment using the Ecological Structure Activity Relationships (ECOSAR) Class Program. The obtained acute and chronic toxicity values implied the relatively low ecological risk of FeP/carbon-PMS reaction system for STZ treatment.

miR-31/QKI-5 axis facilitates cell cycle progression of non-small-cell lung cancer cells by interacting and regulating p21 and CDK4/6 expressions.

BACKGROUND: RNA-binding protein Quaking-5 (QKI-5), a major isoform of QKIs, inhibits tumor progression in non-small cell lung cancer (NSCLC). However, the underlying molecular mechanisms of QKI-5 in the cell cycle of NSCLC are still largely unknown. METHODS: MTT, flow cytometry, and colony formation assays were used to investigate cellular phenotypic changes. Mice xenograft model was used to evaluate the antitumor activities of QKI-5. Co-immunoprecipitation, RNA immunoprecipitation (RIP), and RIP sequencing were used to investigate protein-protein interaction and protein-mRNA interaction. RESULTS: The QKI-5 expression was downregulated in NSCLC tissues compared with that in paired normal adjacent lung tissues. Overexpression of QKI-5 inhibited NSCLC cell proliferative and colony forming ability. In addition, QKI-5 induced cell cycle arrest at G0/G1 phase through upregulating p21Waf1/Cip1 (p21) expression and downregulating cyclin D1, cyclin-dependent kinase 4 (CDK4), and CDK6 expressions. Further analyses showed that QKI-5 interacts with p21 protein and CDK4, CDK6 mRNAs, suggesting a critical function of QKI-5 in cell cycle regulation. In agreement with in vitro study, the mouse xenograft models validated tumor suppressive functions of QKI-5 in vivo through altering cell cycle G1-phase-associated proteins. Moreover, we demonstrated that QKI-5 is a direct target of miR-31. The QKI-5 expression was anticorrelated with the miR-31 expression in NSCLC patient samples. CONCLUSION: Our results suggest that the miR-31/QKI-5/p21-CDK4-CDK6 axis might have critical functions in the progression of NSCLC, and targeting this axis could serve as a potential therapeutic strategy for NSCLC.

Osthole Suppresses Knee Osteoarthritis Development by Enhancing Autophagy Activated via the AMPK/ULK1 Pathway.

Knee osteoarthritis (KOA) is an increasingly prevalent heterogeneous disease characterized by cartilage erosion and inflammation. As the main chemical constituent of Angelicae Pubescentis Radix (APR), an anti-inflammatory herbal medicine, the potential biological effects and underlying mechanism of osthole on chondrocytes and KOA progression remain elusive. In this study, the potential effect and mechanism of osthole on KOA were investigated in vitro and in vivo. We found that osthole inhibited IL-1ß-induced apoptosis and cartilage matrix degeneration by activating autophagy in rat chondrocytes. In addition, osthole could activate autophagy through phosphorylation of AMPK/ULK1, and AMPK serves as a positive upstream regulator of ULK1. Furthermore, KOA rats treated with osthole showed phosphorylation of the AMPK/ULK1 pathway and autophagy activation, as well as cartilage protection. Collectively, the AMPK/ULK1 signaling pathway can be activated by osthole to enhance autophagy, thereby suppressing KOA development. Osthole may be a novel and effective therapeutic agent for the clinical treatment of KOA.

Risk factors for prolonged preoperative waiting time of intertrochanteric fracture patients undergoing operative treatment.

PURPOSE: Intertrochanteric fracture is a common fracture in older adults. We observed the case characteristics of intertrochanteric fracture and analyzed the risk factors for prolonged preoperative waiting time based on patient data from a 6 year period. Investigate the post-admission treatment of intertrochanteric fracture. METHODS: We retrospectively reviewed the medical records from July 2015 to July 2021 of patients hospitalized for intertrochanteric fracture who had undergone internal fixation surgery in the orthopedic ward of the Affiliated Hospital of Shandong University of Traditional Chinese Medicine. Data regarding gender, age, AO/OTA classification, preoperative waiting time, preoperative medical comorbidities, and complicated deep venous thrombosis (DVT) of lower limbs were collected. Statistical tests were used to evaluate the factors influencing preoperative preparation time and DVT. RESULTS: A total of 1812 cases were retrospectively analyzed, 1258 patients (69.43%) had three or more medical comorbidities. The average preoperative waiting time was 5.09 ± 3.27 days. Advanced age, more preoperative medical comorbidities and DVT led to longer preoperative waiting times, and preoperative medical comorbidities were an independent risk factor. Patients with advanced age and preoperative medical comorbidities were more likely to have DVT. CONCLUSION: Age and preoperative medical comorbidities are risk factors for DVT and prolonged preoperative preparation time in intertrochanteric fracture patients. Preoperative medical comorbidities are an independent risk factors affecting the preoperative waiting time, and a combination of multiple comorbidities almost predicts the delay of the operation time.

Allicin Inhibits Osteosarcoma Growth by Promoting Oxidative Stress and Autophagy via the Inactivation of the lncRNA MALAT1-miR-376a-Wnt/ß-Catenin Signaling Pathway.

Allicin, an organic sulfur compound extracted from the bulb of Allium sativum, can potentially prevent various tumors. Our previous study found that allicin can effectively suppress the proliferation of osteosarcoma cells. However, the molecular mechanisms have not been illustrated. In this study, Saos-2 and U2OS osteosarcoma cells were used to investigate the underlying mechanisms. A series of experiments were carried out to authenticate the anticancer property of allicin. Knockdown of lncRNA MALAT1 inhibited the proliferation, invasion and migration and promoted apoptosis of osteosarcoma cells. Knockdown of miR-376a increased the proliferation, invasion, and migration and dropped apoptosis of osteosarcoma cells. Furthermore, knockdown of miR-376a reversed the influences of MALAT1 silencing in osteosarcoma cells. Based on our data, MALAT1 could downregulate the expression of miR-376a, subsequently accelerating osteosarcoma. Moreover, oxidative stress and autophagy were identified as the potential key pathway of allicin. Allicin inhibited osteosarcoma growth and promoted oxidative stress and autophagy via MALATI-miR-376a. We also found that allicin promotes oxidative stress and autophagy to inhibit osteosarcoma growth by inhibiting the Wnt/ß-catenin pathway in vivo and in vitro. All data showed that allicin promotes oxidative stress and autophagy of osteosarcoma via the MALATI-miR-376a-Wnt/ß-catenin pathway.